4/5 HP Ice Bath Water Chiller - Black

Converts any compatible tub into an iceless cold plunge system.

Provides precise temperature control for consistent recovery sessions.

Built-in filtration and ozone system help maintain clean, low-maintenance water.

Built with a high-performance 4/5 HP compressor system designed for efficient and consistent cooling.

Constructed with a durable galvanized metal housing for long-term use and protection of internal components.

Features a built-in circulation pump for continuous water flow and stable temperature control.

Equipped with a dual filtration system, including a 20-micron external pleated filter as well as a built-in secondary filter for fine impurities

Includes an integrated ozone purification system to help maintain clean water with minimal chemicals.

Designed with IP65 waterproof protection and GFCI safety plug for safe indoor or outdoor operation.

Comes with insulated hoses, adapters, and sealed fittings for leak-resistant installation.

Built with casters and handles for easy mobility and positioning.

Dimensions: 16" x 24" x 20"

Temperature Range: 37°F to 108°F

Cooling Capacity: 2230 (570 - 2820) W

Includes 2 adapters (each with a 3/4-inch female thread to a 1/2-inch male thread)

Dimensions: 16" x 24" x 20"

Temperature Range: 37°F to 108°F

Cooling Capacity: 2230 (570 - 2820) W

Includes 2 adapters (each with a 3/4-inch female thread to a 1/2-inch male thread)

Q: Does the 4/5 HP chiller require ice?

A: No. It automatically cools and maintains water temperature, eliminating the need for ice.

Q: How cold can it get?

A: The chiller can cool water down to approximately 37°F (3°C) depending on ambient conditions.

Q: Can it heat water as well?

A: While it lists a wide temperature range, this model is primarily designed for cooling performance.

Q: How is the water kept clean?

A: It uses a dual filtration system plus ozone sanitation, reducing the need for chemicals.

Q: Can I control it remotely?

A: Yes. The chiller includes Wi-Fi app control, allowing you to adjust temperature, timers, and settings from your phone.

Q: What size tubs is it compatible with?

A: It is recommended for tubs up to ~92 gallons for optimal cooling efficiency.

Requires a standard 110–120V electrical outlet.

Must be installed on a flat, ventilated surface for proper airflow.

Works best with insulated tubs for faster cooling performance.

Designed for tubs under ~92 gallons for optimal efficiency.

Not recommended for use in freezing ambient temperatures (~34°F or lower).

Ensure proper hose connections for inlet and outlet circulation loop.

Periodic maintenance required: Clean internal filter monthly and replace external filter when flow drops.

Ships as a complete chiller system including: Water chiller unit, external filter + housing, 2 replacement filters, a built-in filter and tools, 3 insulated hoses, adapters, and rubber seals.

Securely packaged to protect compressor and internal components.

Plug-and-play setup with minimal assembly required (About 5–10 minutes).